产品介绍
产品特点
Product Features
斜边封边
所见即所得，
0-45度封边快速实现，
斜直适宜，一应俱全，
全斜边、部分斜边、直边自由切换，
支持厚度9-25mm，
随板应变、满足所需。
What you see is what you get,
Quick finishing of
0-45 degrees edge banding
Both bevel and vertical
edging are available
Full bevel，partial bevel and vertical edge switch freely，
Support thickness 9-25mm，
Vary with panel to meet the needs.
（部分斜边 Partial bevel edge）
（全斜边 Full bevel edge）
铣削机构 Milling Unit
直边预铣可对垂直边进行铣削，
斜边预铣可锯切并粉碎切削斜边。
Vertical pre-milling unit
mills vertical edge
Bevel pre-milling unit cuts
and crushes bevel edge.
封边带成型装置
Edge Band Forming Device
对封边内侧进行开槽成型，
便于折弯压贴，保证粘贴质量，防止爆边。
Groove the inner side of edge，
It is convenient for bending and pasting，ensuring pasting quality
and preventing edge cracking.
履带压料 Belt conveyor
压紧接触面积大，
具有更 好的压紧定位效果。
Large contact area for pressing
Better pressing and positioning effect.
前后齐头 Endcutting
通过精密的直线导轨运动，
将工件首尾封边带切断，
控制带前带后用量，保证切断面平整。
Through precise linear guide motion，
Cut off the reduntant edge
at both ends of workpiece，
Control the reserved length
of edge in the front and
rear ends to ensure the
flatness of cutting section.
智能温控
Intelligent Temperature Control
10寸触摸屏，一键操作设置保温功能，
设备空运转时，
自动切换至停机保温功能状态。
Equipped with 10 Inch Touch screen，
one key operation to set
the insulation function，
When the equipment is idling，
Automatically switch to
shutdown insulation state.
清洁机构 Clean Unit
清除残余胶，保持板面清洁。
Remove the residual glue
and keep the board clean.
设备应用
Application
用于无拉手抽屉板，
柜门等家具特殊斜边的封边。
Used for drawer board without handle，
Edge banding for special bevels
of furniture such as cabinet door.
基本参数 Parameters
